Thermal Conductivity Analyzer - Versatile MP-V

Thermal Conductivity Analyzer - Versatile MP-V

Designed for measurement of thermophysical properties, the MP-V offers multiple methods for primary measurement of solids, liquids, paste and powders. With intelligent transient parameter automation, measurements are expertly performed.
MP-V Specifications:
•    High sensitivity controller, with Wheatstone Bridge
•    Data-Point Collection (points): 400 to 600
•    MP software packages: Testing and Analysis
•    iTransient Parameter Automation
•    Unlimited online Training and Support from Thermtest Service Engineer
Thermal Conductivity Methods Included:
•    Transient Plane Source (TPS) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat and thermal effusivity of solids, pastes & powders from 0.01 to 100 or 0.01 to 500 W/m/K following ISO 22007-2 and GB/T 32064
•    Transient Hot Wire (THW) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat of liquids, pastes & powders from 0.01 to 2 W/m/K. ASTM D7896
Transient Plane Source (TPS):
•    Materials: Solids, Pastes and Powders
•    Accuracy: 5 %
•    Repeatability: 1 - 2 %
•    Temperature: -75 °C to 300 °C (requires temperature chamber)
Temperature Chamber:
•    Dry Bath: 0 to 100 °C 
Included Testing Modules:
•    TPS Standard - Bulk Module for measurement of low to high thermal conductivity materials
•    TPS Slab - (avg radial), thermophysical properties of thermally conductive sheets
•    Basic Thermal Conductivity: 0.01 to 100 W/m/K
•    With optional Max Power Thermal Conductivity: 0.01 to 500 W/m/K
•    Additional properties: Thermal Diffusivity, Volumetric Specific Heat, Thermal Effusivity
•    Test Time: 2 to 160 seconds
•    Sample Size: 10 x 10 mm to unlimited
•    Sample Thickness: 0.01 mm to unlimited
•    TPS Slab Sample: Smallest Sample: 15 x 15 x 0.1 mm
•    Sample Configuration: Symmetric (Double-Sided), Asymmetric (Single-Sided)
•    Stainless Steel 304 Verification Material
•    Standard: ISO 22007-2, GB/T 32064
*Based on testing module used and sample properties
Transient Hot Wire (THW):
•    Materials: Liquids, PCMs
•    Thermal Conductivity: 0.01 to 2 W/m/K
•    Temperature: -50 to 100 °C (requires temperature chamber)
•    Additional Properties: Thermal Diffusivity, Volumetric Specific Heat
•    Measurement Time: 1 second
•    ASTM Standard: ASTM D7896-19
Temperature Chamber:
Dry Bath: 0 to 100 °C